Single Spring

Series – 1: These seal designed to handle abrasive, slurry, sludge, sewage and viscous fluids. Different seal materials and design available according to applications.

Operating Condition :-

Type	Temp	Pressure	Speed
130	-17°C to 204°C	10bar	26 m/s
131	-23″C to 250°C	10bar	26 m/s
170	-17°C to 204°C	35bar	26 m/s
171	-23″C to 250°C	35bar	26 m/s

Equivalents to :- John Crane – 209, 2095, Sealol-Series – 1500, Dura –  ARO, ARO – TT, APTO, APT Burgmann H76 and similar.

Multi Springs

Series – 2 : These seals having compact design, with interchangeable parts. Hence low cost easy in maintenance & installation. Different seal materials & design are available according to applications.

Operating Condition :-

Type	Temp	Pressure	Speed
230	-17°C to 204°C	10bar	26 m/s
231	-23″C to 250°C	10bar	26 m/s
270	-17°C to 204°C	35bar	26 m/s
271	-23″C to 250°C	35bar	26 m/s

Equivalents to :- John Crane – 58U, 5811, 59U, 59B, Sealol – Series – 500, Burgman – M74 and similar.

PTFE Bellow

Series – 3: These series are developed to handle extremely corrosive liquids such as acids and alkalies etc. These seals are mounted externally with replaceable seal face. Different seal materials are available according to applications.

Operating Condition :-

Type	Temp	Pressure	S. Speed
33S	120°C	6bar	20 m/s
33R	120°C	6bar	20 m/s

Equivalents to:- John Crane – 20, 20R, Durra – TB, TBR Sealol – 650, 652, Burgmann – TF.

Conical Spring

Series –  4 : These seals are designed in single conical self-driving spring, It is used for normal applications in gear pumps, water pumps and mono block pumps.

Operating Condition :-

Type	Temp	Pressure	Speed
430	-23°C To 204°C	10bar	20 m/s
470	-23°C To 204°C	25bar	20 m/s

Equivalent to :- Dura Metallic CRO, Burgmann M2 and M3

Rubber Bellow

Series –  5 : These series having elastomer bellow, which allows self alignment in shaft motion. It is simple in installation & maintenance and parts are interchangeable, it is low cost due to mass production.

Operating Condition :-

Type	Temp	Pressure	Speed
501, 512, 513	-17°C to 180°C	12bar	20 m/s
543	-17°C to 180°C	10bar	20 m/s
51,51A,52	-17°C to 180°C	35bar	20 m/s
56,56A	-17°C to 150°C	5bar	20 m/s

Equivalents to :- John Crane – 6, 6A, 1, 1A, 2, Sealol – 43, Burgmann – MG Series.

Reverse Balance Sal

Series –  6 : These seals are designed external mounted hydraulic pressure balanced without Shaft – Step or Sleeve. This seal specially used for corrosive application because all metallic components do Not come In contact with liquid to be sealed.

Operating Condition :-

Type	Temp	Pressure	Speed
670	-23°C to 150°C	25bar	20 m/s

 Equivalent to Dura RA and similar.

Metal Bellow Seal

Series –  7 : These seal are ideal for high temperature application. The welded metal bellow provide face load under any operating conditions.

Operating Condition :-

Type	Temp	Pressure	Speed
770	-23°C To 204°C	14bar	26 m/s
770/771,771	-45°C To 350°C	14bar	26 m/s

Equivalents to :- John Crane – 15W, 15WV 215, Burgmann – ME Series, Dura Metallic – CBR, CBS, PBR, PBS.

Wave Spring

Series –  8 : These seals designed with wave spring to handle abrasive, slurries, sludes, sewage and viscous fluid. Major advantage of this seal is that it is compact, axial length but no sticking or clogging.

Operating Condition :-

Type	Temp	Pressure	Speed
830	-17°C to 204°C	10bar	26 m/s
831	-23°C to 250°C	10bar	26 m/s
870	-17°C to 204°C	35bar	26 m/s
871	-23°C to 250°C	35bar	26 m/s

Equivalent to Borgmann M7 and similar.

Cartridge Seat

Series –  9 : These series are designed outperforms seal balance independent of direction of shaft rotation It is pre-assembled tested unit so easy and reliable mounted with no setting or alignment.

Operating Condition :-

Type	Temp	Pressure	Speed
970	-23°C To 204°C	15bar	20 m/s
971	-15°C To 250°C	25bar	20 m/s